Courtesy of BMR

Thonotosassa, FL – Minimize suspension deflection and improve overall handling in your 2010-2011 Camaro with a Total Suspension Bushing Kit from BMR Suspension.  

Manufactured from low-deflection polyurethane, this kit consists of the PRO version Rear Cradle Bushing Kit (BK030), Rear Suspension Bushing Kit (BK021), and Front Suspension Bushing Kit (BK022). 

The BMR Total Suspension Bushing Kit (BK031) minimizes bushing deflection in all front and rear suspension links. This kit goes a step further than our BK023 kit by further reducing rear cradle movement with full cradle bushings and higher durometer differential bushings.

Reduced suspension deflection ensures maximum tire contact resulting in better traction and more consistent and predictable handling abilities.

To preview all of BMR’s high-performance suspension parts, please visit www.bmrsuspension.com, email sales@bmrsuspension.com, or contact them at BMR Suspension, 12581 US Highway 301 North, Thonotosassa, FL 33592, 813-986-9302, Fax: 813-986-8055.

Courtesy of BMR

Thonotosassa, FL – Improve the handling and cosmetic appeal of your 5^th Gen Camaro without sacrificing ride quality with a set of Lowering Springs from BMR Suspension.  The front springs lower the vehicle by 1.4” and have a spring rate of 220 pounds per inch. 

The rear springs lower the vehicle by 1.4” and have a spring rate of 460 pounds per inch.  Both springs are constructed from high tensile silicone chromium spring wire.  A set of BMR Lowering Springs (SP022) will lower the center of gravity and dramatically increase the cornering capabilities of your F-Body.  

Front springs (SP023) and rear springs (SP024) also sold separately.  Installation time of 3-4 hours. Available in a red powdercoat finish.

Continue reading →

Courtesy of BMR

Thonotosassa, FL – Improve overall handling in your 2010-2011 Camaro with a Level 1 Handling Performance Package from BMR Suspension.  This kit consists of a BMR Sway Bar Kit (SB030) and a BMR 1” Lowering Spring Kit (SP019). 

The front sway bar is cold formed from lightweight tubular DOM steel and have an outside diameter of 29mm.  The rear sway bar is also cold formed from DOM steel and have a 25mm diameter. 

The sway bars feature 3 adjustment locations and integrated thrust washers to prevent horizontal movement.  BMR springs are constructed from high tensile silicone chromium spring wire and come with a lifetime warranty against spring sag. 

Continue reading →

Courtesy of BMR

Thonotosassa, FL – Gain superior handling and greater adjustability in your 70-73 Camaro/Firebird with a Torque Arm Suspension from BMR Suspension.  

This complete kit comes with an adjustable torque arm, Watts Link, torque arm cross-member, coil-over conversion cross-member, lower control arms, and all necessary mounting hardware.  

The torque arm is equipped with a Delrin-bushed, telescoping front mount for bind-free axle articulation and a pinion-angle adjustable rear mount.  The Watts link centers the rear axle housing even if the suspension is fully extended or compressed.  

The BMR Torque Arm Suspension (TAS004, TAS005, TAS006) is a true bolt-in kit that can be installed without cutting or welding the floor or frame.  The suspension can be unbolted and the car can easily be returned to stock if desired. 

Continue reading →

Courtesy of BMR

Thonotosassa, FL – Minimize suspension deflection and improve overall handling in your 2010-2011 Camaro with a Total Suspension Bushing Kit from BMR Suspension.

Manufactured from low-deflection polyurethane, this kit consists of the Street version Rear Cradle Bushing Kit (BK020), Rear Suspension Bushing Kit (BK021), and Front Suspension Bushing Kit (BK022). 

The BMR Total Suspension Bushing Kit (BK023) minimizes bushing deflection in all front and rear suspension links. Reduced suspension deflection ensures maximum tire contact resulting in better traction and more consistent and predictable handling abilities.

To preview all of BMR’s high-performance suspension parts, please visit www.bmrsuspension.com, email sales@bmrsuspension.com, or contact them at BMR Suspension, 12581 US Highway 301 North, Thonotosassa, FL 33592, 813-986-9302, Fax: 813-986-8055.

Courtesy of BMR

Thonotosassa, FL – Eliminate differential movement and maximize driveline response in your high-horsepower 2010+ Camaro and Pontiac G8 with a set of Delrin Differential Bushings from BMR Suspension.  These bushings are CNC-machined from Delrin plastic which is known for its high stiffness, low friction and excellent dimensional stability.  The two-piece design allows full contact on all 6 thrust surfaces of the subframe mount.  The BMR Delrin Differential Bushings (BK026) provide the best control possible making them the ideal choice for all forms of competition.

To preview all of the BMR high-performance suspension parts, please visit www.bmrsuspension.com, email sales@bmrfabrication.com, or contact them at BMR Suspension, 12581 US Highway 301 North, Thonotosassa, FL 33592, 813-986-9302, Fax: 813-986-8055.

Courtesy of BMR

Thonotosassa, FL – Protect your automatic equipped V6 5^th Gen Camaro while complying with NHRA safety rules with a Driveshaft Safety Loop from BMR Suspension.  Constructed from NHRA legal 1/4” steel plate, the Driveshaft Safety Loop is cheap insurance to protect your investment and provide peace-of-mind whether you are at the track or on the street.  The BMR Driveshaft Safety Loop (DSL014) bolts-on by utilizing (2) existing mounting holes and (2) new holes drilled into the factory transmission cross-member.  Provided with Grade 8 hardware.  Installation time is only 1 hour.  Available in black hammertone or red powdercoat.

To preview all of BMR’s high-performance suspension parts, please visit www.bmrsuspension.com, email sales@bmrsuspension.com, or contact them at BMR Suspension, 12581 US Highway 301 North, Thonotosassa, FL 33592, 813-986-9302, Fax: 813-986-8055.

Courtesy of BMR

Thonotosassa, FL – Improve the handling and cosmetic appeal of your 5^th Gen Camaro without sacrificing ride quality with a set of Lowering Springs from BMR Suspension.  The front springs lower the vehicle by 1” and have a spring rate of 220 pounds per inch.  The rear springs lower the vehicle by 1” and have a spring rate of 460 pounds per inch.  Both springs are constructed from high tensile silicone chromium spring wire.  A set of BMR Lowering Springs (SP019) will lower the center of gravity and dramatically increase the cornering capabilities of your F-Body.  Front springs (SP020) and rear springs (SP021) also sold separately.  Installation time of 3-4 hours. Available in a red powdercoat finish.

To preview all of BMR’s high-performance suspension parts, please visit www.bmrsuspension.com, email sales@bmrsuspension.com, or contact them at BMR Suspension, 12581 US Highway 301 North, Thonotosassa, FL 33592, 813-986-9302, Fax: 813-986-8055.

Courtesy of BMR

Thonotosassa, FL – Lower the front of your 4^th Generation F-body 1” without affecting suspension travel with a set of Lowering A-arms from BMR Fabrication.  Based on our well proven traditional A-arm design, these lowering A-arms are constructed from a combination of 1-5/8” and 1-1/4” DOM tubing and feature 3/16” laser cut steel plates and CNC machined ball joint cups.  The BMR Lowering A-arms (AA020) utilize a combination of low-deflection, internally fluted polyurethane bushings and Teflon-lined XR series spherical rod ends with stainless spacers.  The result is a high quality tubular A-arm that not only reduces weight by 10 lbs. but lowers the vehicle without the typical geometry and alignment concerns.  Installation time is only 2-3 hours.  Available in black hammertone or red powdercoat.

To preview all of BMR’s high-performance suspension parts, please visit www.bmrsuspension.com, email sales@bmrfabrication.com, or contact them at BMR Suspension, 12581 US Highway 301 North, Thonotosassa, FL 33592, 813-986-9302, Fax: 813-986-8055.

Courtesy of BMR Fabrication

Thonotosassa, FL – Stiffen up the chassis for greatly improved handling in your 1st Gen F-body with Weld-on Sub Frame Connectors from BMR Fabrication.  This product is constructed from 2” x 2” x 0.120” laser-profiled square tubing and 3/16” CNC laser cut steel mounting plates.  The BMR Sub Frame Connectors (SFC006) weld through the floor pan, connecting the front sub frame to the rear sub frame.  The unique profile provides OE ground clearance and an unparalleled structural advantage compared to other designs.  Provided with Delrin body mount bushings and grade 8 mounting hardware.  Installation time is only 2-3 hours.

To preview all of BMR’s high-performance suspension parts, please visit www.bmrfabrication.com, email sales@bmrfabrication.com, or contact them at BMR Fabrication, 12581 US Highway 301 North, Thonotosassa, FL 33592, 813-986-9302, Fax: 813-986-8055.