Seffner, FL – Improve the handling and increase the roll resistance in your 2013 Camaro with a Sway Bar Kit from BMR Suspension.  The hollow front sway bar features 3 adjustment locations that range from 98% to 214% stiffer than the OE bar.  The hollow rear sway bar features 3 adjustment locations that range from 100% to 200% stiffer than the OE bar.

Both sway bars are cold formed from lightweight tubular DOM steel and feature integrated thrust washers to prevent horizontal movement.  A set of BMR Sway Bars (SB039) will decrease body roll and dramatically increase the cornering capabilities of your 5^th Gen.  Front sway bar (SB038) and rear sway bar (SB033) also sold separately.  Available in a red and black hammertone powdercoat finishes.  Installation time for both sway bars is only 2-3 hours.

To preview all of BMR’s high-performance suspension parts, please visit www.bmrsuspension.com, email sales@bmrsuspension.com, or contact them at BMR Fabrication, 928 Sligh Avenue, Seffner, FL 33584, 813-986-9302, Fax: 813-986-8055.

Seffner, FL – Decrease front end weight while providing more header and turbo clearance in your 2011+ Mustang with a K-Member from BMR Suspension.  The K-Member is constructed from 1.5” and 1.25” DOM steel tubing and 3/16” CNC laser-cut mounting plates for uncompromised strength and durability.

Factory K-Members are manufactured from stamped steel light-gauge sheet metal and use bulky, flexible hydraulic motor mounts. The BMR K-Member (KM018) has an integrated motor mount design composed of low-profile, high-density polyurethane bushings with machined spacers.  Designed specifically for 2011+ Mustangs equipped with electric power steering, the BMR K-Member provides an 18 pound weight savings.  Installation time is only 2-3 hours.  Available in black hammertone or red powdercoat.

To preview all of BMR’s high-performance suspension parts, please visit www.bmrsuspension.com, email sales@bmrsuspension.com, or contact them at BMR Suspension, 928 Sligh Avenue, Seffner, FL 33584, 813-986-9302, Fax: 813-986-8055.

Seffner, FL – Improve handling and front end stability in your 1964-1972 A-Body with a set of Pro Touring upper A-arms from BMR Suspension. Manufactured from 1.25” DOM tubing and laser cut 3/16” mounting plates, these arms feature low-deflection, internally-fluted Delrin bushings with easy-to-access grease fittings.

The BMR Pro Touring Upper A-arms (AA028) feature taller ball joints for an improved camber curve, 2 additional degrees of positive caster for increased high speed stability and increased camber gain while turning, and shorter A-arm tube lengths for a smaller shim stack on lowered vehicles.  This A-arm will outperform the OE arms in every aspect – less weight, better performance, and increased strength.  Available in red and black hammertone powdercoat finishes.  Installation time of 2-3 hours.

To preview all of BMR’s high-performance suspension parts, please visit www.bmrsuspension.com, email sales@bmrsuspension.com, or contact them at BMR Suspension, 928 Sligh Avenue, Seffner, FL 33584, 813-986-9302, Fax: 813-986-8055.

Seffner, FL – Decrease front end weight and provide extra clearance for low mount turbos in your 1998-2002 F-Body with a K-Member from BMR Suspension.  The K-Member is constructed from DOM steel tubing and 3/16” laser-cut mounting plates for uncompromised strength and durability.

The BMR Low Mount Turbo K-Member (KM019) has high-clearance vertical motor stands that provide an unobstructed direct air inlet routing to the compressors when running twin low mount turbochargers.  The motor stands utilize low-profile, high-density polyurethane bushings relocated down low, away from the heat of the turbochargers.

Seffner, FL – Improve the stance and handling capabilities of your 1979-2004 Mustang with a set of Lowering Springs from BMR Suspension.  The front springs lower the vehicle by 1” and have a linear spring rate of 525 pounds per inch.  The rear springs also lower the vehicle by 1” and have a linear spring rate of 235 pounds per inch.

All BMR springs are cold wound from high tensile silicone chromium spring wire then shot-peened and computer tested for consistency.  A set of BMR Lowering Springs (SP027) will lower the center of gravity and dramatically increase the cornering capabilities of your Mustang without sacrificing ride quality.  Front springs and rear springs also sold separately. Installation time of 3-4 hours.  Available in red powdercoat finish.

Continue reading →

Seffner, FL – Improve handling and front end stability in your ‘67-‘69 Camaro, ‘67-‘69 Firebird, or ‘68-‘74 Nova with a set of Pro Touring upper A-arms from BMR Suspension. Manufactured from 1.25” DOM tubing and laser cut 3/16” mounting plates, these arms feature low-deflection, internally-fluted Delrin bushings with easy-to-access grease fittings.

The BMR Pro Touring Upper A-arms (AA027) feature taller ball joints for an improved camber curve, 2 additional degrees of positive caster for increased high speed stability and increased camber gain while turning, and shorter A-arm tube lengths for a smaller shim stack on lowered vehicles.  This A-arm will outperform the OE arms in every aspect – less weight, better performance, and increased strength.  Available in red and black hammertone powdercoat finishes.  Installation time of 2-3 hours.

To preview all of BMR’s high-performance suspension parts, please visit www.bmrsuspension.com, email sales@bmrsuspension.com, or contact them at BMR Suspension, 928 Sligh Avenue, Seffner, FL 33584, 813-986-9302, Fax: 813-986-8055.

Thonotosassa, FL – Increase front end stability and chassis rigidity with a Chassis Brace from BMR Suspension.  This chassis brace is constructed from heavy duty 3/16” laser cut mounting plates and DOM tubing.  Superior to the factory stamped steel design, the BMR Chassis Brace (CB004) replaces the OE brace found on 2011-present Mustangs and is necessary when using the BMR K-member.

This brace may also be used to update your 2005-2010 Mustang to 2011 specs by combining it with the BMR K-member (KM018) and Radiator Support (RS003).  Installation time is an easy 1-2 hours.  Available in black hammertone or red powdercoat.

To preview all of BMR’s high-performance suspension parts, please visit www.bmrsuspension.com, email sales@bmrsuspension.com, or contact them at BMR Suspension, 12581 US Highway 301 North, Thonotosassa, FL 33592, 813-986-9302, Fax: 813-986-8055.

Seffner, FL – Improve the stance and handling capabilities of your A-Body with a set of Lowering Springs from BMR Suspension.  The front springs lower the vehicle by 2” and have a linear spring rate of 520 pounds per inch.  The rear springs also lower the vehicle by 2” and have a variable spring rate of 125-200 pounds per inch.

All BMR springs are cold wound from high tensile silicone chromium spring wire then shot-peened and computer tested for consistency.  A set of BMR Lowering Springs (SP031: 67-72 models, SP033: 64-66 models) will lower the center of gravity and dramatically increase the cornering capabilities of your A-Body without sacrificing ride quality.  Front springs and rear springs also sold separately. Installation time of 3-4 hours.  Available in red powdercoat finish.

To preview all of BMR’s high-performance suspension parts, please visit www.bmrsuspension.com, email sales@bmrsuspension.com, or contact them at BMR Suspension, 928 Sligh Avenue, Seffner, FL 33584, 813-986-9302, Fax: 813-986-8055.

Thonotosassa, FL – Decrease front end weight, lower your motor, and increase header and turbo clearance in your 2011+ Mustang with a K-Member from BMR Suspension.  The K-Member is constructed from DOM steel tubing and 3/16” laser-cut mounting plates for uncompromised strength and durability.  The BMR K-Member (KM020) has a ½” lowered integrated motor mount design composed of low-profile, high-density polyurethane bushings with machined spacers.

The BMR K-Member is both stronger and lighter than the factory stamped steel design with the flexible hydraulic motor mounts.  Designed specifically for 2011+ Mustangs equipped with electric power steering, the BMR K-Member provides an 18 pound weight savings.  Installation time is only 2-3 hours.  Available in black hammertone or red powdercoat.

To preview all of BMR’s high-performance suspension parts, please visit www.bmrsuspension.com, email sales@bmrsuspension.com, or contact them at BMR Suspension, 12581 US Highway 301 North, Thonotosassa, FL 33592, 813-986-9302, Fax: 813-986-8055.

Courtesy BMR

Thonotosassa, FL – Minimize strut tower deflection in your 5th Gen Camaro with a bolt-in Strut Tower Brace from BMR Suspension. Constructed from a combination of 1.25” and 1” heavy wall tubing, this product maintains front end stability during hard cornering by eliminating tower deflection.

The BMR Strut Tower Brace (STB017) bolts-in directly to the top of the strut towers using existing mounting holes (no drilling required). The high clearance design fits both V6 and V8 models and permits easy engine cover removal. Installation time is only 15 minutes. Available in black hammertone or red powdercoat.

To preview all of BMR’s high-performance suspension parts, please visit www.bmrsuspension.com, email sales@bmrsuspension.com, or contact them at BMR Suspension, 12581 US Highway 301 North, Thonotosassa, FL 33592, 813-986-9302, Fax: 813-986-8055.